•
Scroll through the parameter list until you reach the parameter that you want to change.
•
For a parameter that can take a range of values:
- Highlight the parameter, and then press the [SPACE] key or double-click the
parameter.
- An associated dialog box containing the valid range of values for the parameter and
the current setting like the sample screen following is displayed.
- Type a value in the field provided.
•
For a parameter that takes a single character:
- Highlight the parameter and then press the [SPACE] key, or double-click on the
parameter. The following screen is displayed:
•
When you've completed your edits, tap on OK.
Preliminary Draft
EP10 Hand-Held (Windows Embedded 6.5) User Manual
Appendix D: Teklogix Imagers Applet
Filter Tab – Manipulating Bar Code Data
D-19