Chapter 5: Settings
Setting Up a Network Card
To disable a particular radio connection rather than all connections:
•
Highlight an Available (enabled) radio listed in this dialog box, and then tap on the
Disable button.
5.42.2 Setting Up a Network Card
Network (802.11) cards are used to connect to a network so that you can browse the Internet,
download e-mail and so on. You can connect to an existing network, or you can set up a new
connection on your EP10.
Important: The EP10 is equipped with context sensitive Help Files. If you find that
5.42.3 Network Adaptor Cards
Important: For 802.11b/g (Summit) CF card adaptor setup details, refer to "Setting Up
When the network card is inserted in your unit for the first time, the Network Settings screen
is displayed automatically so that you can configure the card. If it does not appear, or if you
want to change settings:
Tap on Start>Settings>Connections tab.
•
190
EP10 Hand-Held (Windows Embedded 6.5) User Manual
Preliminary Draft
you're unsure how to proceed with a network connection at any point
during setup, tap on the question mark icon in the navigation bar at the top
of the screen.
the 802.11a/b/g/n Radio" on page 21.