Psion EP10 Quick Start Manual

CONTENTS OF THE BOX
Desktop docking station This guide
Power supply with cable and DC plug
Note: A USB cable is also included with the desktop dock.
FEATURES
FRONT VIEW REAR VIEW
Dock/charge well Spare battery charge well
DC socket
Spare battery charge LED
Micro USB port
CONNECT TO AN EXTERNAL
POWER SUPPLY
Connect the power supply to the desktop
1
docking station.
Insert the DC plug from the power supply into the socket
on the back of the desktop charger.
Insert the country-compatible power cord (ordered
separately) into the power supply.
REAR VIEW
DC socket
DC plug
To power source
Plug the power cord into an external power
2
source.
CHARGING THE EP10 BATTERY
TO CHARGE THE BATTERY INSTALLED IN
THE EP10:
1
Slide the EP10 into the charge well.
Press down to firmly seat the hand-held in the charge well.
2
Charge the EP10 for at least 4 hours.
Allow the battery to charge for at least 4 hours
before use.
Note: Full battery performance is only
0 – 40° C
reached after the first few full
32 - 104° F
charge/discharge cycles.
TO CHARGE A SPARE BATTERY:
1 Slide the battery into the spare battery charge well
at the back of the docking station.
Press down firmly. Make certain that the contacts on the
spare battery and those in the charge well meet.
Spare battery charge well
2
Charge the new battery for at least 4 hours
before use.
Note: You can charge a spare battery while the EP10 is docked
and charging in the docking station.
OVER
>