Removing A Custom Preset; Configuring The Bar Code Decoding Camera Presets - Psion 7515 User Manual

- Highlight the parameter and then press the [SPACE] key, or double-click on the
parameter. Either method toggles between the two available values.
• When you've completed your edits, tap on OK.
The parameter list is displayed; the new value for the changed parameter is shown.
• Tap on OK to exit to the preset list and save the changes.
D.3.7

Removing A Custom Preset

• Highlight the custom preset you want to delete, and tap on the Remove button.
A window is displayed warning you that you are about to remove a preset.
Tap on Yes to remove the preset or No to cancel the operation.
•
D.4

Configuring The Bar Code Decoding Camera Presets

To configure the bar code decoding camera presets:
• Tap on Start>Settings>System tab.
• Tap on the Barcoding tab.
Figure D.5 Bar Code Presets
This window lists all the presets, both predefined and the custom. Presets are identified as
follows:
• Predefined presets are marked as read-only. For a description, review "Predefined Pre-
sets" on page D-2.
• Custom presets are marked as read and write.
• One preset – either predefined or custom – is marked as active.
Preliminary Draft
EP10 Hand-Held (Windows Embedded 6.5) User Manual
Appendix D: Teklogix Imagers Applet
Removing A Custom Preset
D-9