The Non-Powered Vehicle Cradle - Model No. Rv1000 - Psion 7515 User Manual

Chapter 6: Peripheral Devices & Accessories
The Non-Powered Vehicle Cradle – Model No. RV1000
Figure 6.9 Vehicle Power Outlet Adaptor
• Insert the DC power plug into the DC IN port at the base of a snap module – Model No.
RV4001 or RV4002 (see TBD).
• Insert the vehicle power outlet adaptor plug into the power outlet in your vehicle.
6.11 The Non-Powered Vehicle Cradle – Model No. RV1000
The RV1000 vehicle cradle is a passive device, designed to securely grip the EP10. The
cradle design permits access for the DC input cable to connect to the EP10 (see Figure 6.10
on page 239).
• A stylus holder.
• A loop for tethering the stylus.
• A cable tidy for draping the power cables or storing the disconnected DC plug.
Note: Shock and vibration specifications for the EP10 are verified using Psion Teklogix-
approved RAM mounts and mounting hardware. Use of non-certified Psion Teklogix
mounting hardware is not recommended, and may void warranty coverage.
238 EP10 Hand-Held (Windows Embedded 6.5) User Manual
Preliminary Draft
DC Power Plug
Adaptor Plug
Vehicle Power