Selecting A Camera; Setting The Active Preset; Viewing A Preset; D.4.1 Selecting A Camera - Psion 7515 User Manual

Appendix D: Teklogix Imagers Applet

Selecting A Camera

Note: The top portion of the window displays the bar code decoding camera presets.
The top port of the window displays the bar code decoding camera presets.
D.4.1 Selecting A Camera
If your EP10 has more than one built-in camera, one camera must be selected for configura-
tion. To select a camera:
Tap on the Camera Presets dropdown menu to view the camera options.
•
• Choose a camera – either Front Imager, the imager located at the top of the unit, or
Bottom Colour Camera, the camera located at back of the EP10.
Important: Currently, only the 'Front Imager' can be used to read bar codes. The
D.4.2

Setting The Active Preset

An active preset has an A to the right; in Figure D.5 on page page D-9, the active preset is
Defaults. To set an active preset:
Highlight the preset, and tap on the Activate button.
•
D.4.3

Viewing A Preset

To view the parameter settings in a preset:
• Highlight a preset, and tap on the View button.
D-10 EP10 Hand-Held (Windows Embedded 6.5) User Manual
Preliminary Draft
'Bottom Colour Camera' is limited to taking photos.