To change the Display Name, tap on the Advanced button. This is an optional step.
•
Tap on Save.
•
Note: To connect to a Bluetooth-equipped device that's already been added, tap on the item
in Bluetooth list box.
5.39.1.1 Pairing a Device
If you intend to pair devices (a headset, for example), power on and bring the device within
10 meters of the EP10 before proceeding with the discovery process described below.
Important: Follow the steps under "Pairing a Bluetooth Headset" on page 25 to pair a
Preliminary Draft
Bluetooth a headset with your EP10.
If you prefer, you can go to the Today screen, and tap on –
Getting Started>Set up Bluetooth – to get pairing information.
EP10 Hand-Held (Windows Embedded 6.5) User Manual
Chapter 5: Settings
The Devices Tab
175