Ac Wall Adaptor - Model No. Ps1050-G1; Vehicle Power Outlet Adaptor - Model No. Rv3050 - Psion 7515 User Manual

6.9 AC Wall Adaptor – Model No. PS1050-G1
The AC wall adaptor available for your EP10 allows you to operate your EP10 using AC
power while charging the battery inserted in the unit.
Adaptor plugs suitable for use in the following countries are shipped with the AC wall adap-
tor: United Kingdom, Switzerland, Japan, Israel, Australia, Europe, and North America (see
Figure 6.8 on page 237).
Figure 6.8 AC Wall Adaptor Plugs
• Choose the adaptor plug that is suitable for use in your country. Slide the adaptor plug
into the Universal AC power supply, snapping it into place. These two pieces, coupled
together, are referred to as an AC wall adaptor.
• Insert the DC power plug into the DC IN port at the base of the EP10, located between
the tether and LIF ports.
• Plug the pronged end into an AC outlet.
6.10 Vehicle Power Outlet Adaptor – Model No. RV3050
Important: It is critical that you review the safety instructions outlined in the quick
The vehicle power outlet adaptor allows you to power your EP10 and recharge your battery
using power drawn from your vehicle's power outlet.
Preliminary Draft
Universal AC Power Supply
start guide enclosed with your vehicle power adaptor before using
the accessory.
Chapter 6: Peripheral Devices & Accessories
AC Wall Adaptor – Model No. PS1050-G1
Adaptor Plugs
DC Power Plugs
EP10 Hand-Held (Windows Embedded 6.5) User Manual 237