Tap on the Network Cards icon.
•
•
If you need to specify server information, double-tap on the appropriate adaptor, and
then tap on the IP Address and/or Name Servers tab.
Note: Because most networks use DHCP, you should not need to change these settings
unless instructed to do so by your network administrator.
•
If necessary, use a network cable to connect the network card to your network. Refer to
the documentation shipped with your network card for details.
•
To activate the connection, launch the desired program (e.g., Internet Explorer). The
EP10 will connect automatically.
Preliminary Draft
EP10 Hand-Held (Windows Embedded 6.5) User Manual
Chapter 5: Settings
Network Adaptor Cards
191