Table of Contents
Advertisement
Appendix D: Teklogix Imagers Applet
Modifying A Custom Preset
The preset list is displayed; the new custom preset appears at the end of the list. It is marked
as read and write.
D.4.5
Modifying A Custom Preset
The parameter values in a custom preset can be modified. It is recommended that very few
changes be made to a custom preset. To ensure that it will work reliably, it should be as close
as possible to the original predefined preset. To change a parameter value:
•
Highlight the custom preset, and tap on the Edit button.
•
Tap on the + symbols to expand the lists and view the parameter settings.
•
Scroll through the parameter list until you reach the parameter that you want to change.
•
For a parameter that can take a range of values:
D-12
EP10 Hand-Held (Windows Embedded 6.5) User Manual
Preliminary Draft
Advertisement
Table of Contents
Troubleshooting
