Operator Controls; Indicators; Operation; Charging The Ep10 Battery - Psion 7515 User Manual

Chapter 6: Peripheral Devices & Accessories

Operator Controls

Figure 6.4 RV4000 Desktop Docking Station – Front View
Important: This docking station can only be used to charge Psion Teklogix approved
6.5.1

Operator Controls

The RV4000 has one operator control – the USB door on the rear that switches from Type A
to Type B (see "Operating the USB Dock" on page 227).
6.5.2

Indicators

The RV4000 desktop docking station is equipped with a single LED on the front panel that
indicates the charge status of the spare battery.
6.5.3

Operation

6.5.3.1 Charging the EP10 Battery

The RV4000 supplies DC power to enable the EP10 internal fast charger. Normally, it takes
2.5 to 3.0 hours to charge the 3600 mAh battery installed in the EP10.
When the EP10 hand-held is installed in the dock, the battery charge LED on the EP10 (the
left-most LED) lights up to indicate the unit has external power and may charge the internal
battery. The EP10 charge LED follows the same convention as the RV4000 docking station
226 EP10 Hand-Held (Windows Embedded 6.5) User Manual
Preliminary Draft
Stylus
Lithium-Ion batteries.
PLACE HOLDER
Rear-Mounted Spare Battery
Spare Battery Charge LED