Chapter 5: Settings
Establishing a Connection
A GPRS packet data connection is active.
CDMA/1xRTT
Signal strength is between 1% and 20%.
Signal strength is between 21% and 40%.
Signal strength is between 41% and 60%.
Signal strength is between 61% and 80%.
Signal strength is between 81% and 100%.
A CDMA/1xRTT packet data connection is active.
5.44.2 Establishing a Connection
Tap on Start>Settings. Tap on the System tab followed by the Wireless WAN icon.
•
Note: If you are prompted to enter a PIN, refer to "Entering a PIN" on page 199
for details.
The Status field indicates when the unit is ready to connect–the Connect Data button
is enabled.
•
Tap on the Connect Data button.
The progress of the connection is tracked in the Status field.
•
PPP link to modem active
198
EP10 Hand-Held (Windows Embedded 6.5) User Manual
Preliminary Draft