Scancode Remapping - Psion 7515 User Manual

Adding and Changing Unicode Values
Important: Changes to Unicode mappings are not saved until you exit the Unicode
Tap on the Add/Change button.
•
• Highlight a value in the Unicode mapping list.
Position the cursor in the Unicode Mapping field, and type a Unicode value for the
•
highlighted key.
Note: To add a shifted state – [SHIFT] and/or [CTRL], tap on the checkbox next to 'SHIFT
Pressed' and/or 'CTRL Pressed'.
Removing Unicode Values
• In the Unicode Mapping tab, highlight the item you want to delete, and tap the
Remove button.
5.4.6

Scancode Remapping

A scancode is a number that is associated with a physical key on a keyboard. Every key has
a unique scancode that is mapped to a virtual key, a function or a macro. Scancode Remap-
ping allows you to change the functionality of any key on the keyboard. A key can be
remapped to send a virtual key (e.g. VK_F represents the 'F' key; VK_RETURN represents
the [ENTER/Power] key, etc.), perform a function (e.g. turn the scanner on, change vol-
ume/contrast, etc.) or run a macro.
Preliminary Draft
Mapping tab by tapping on [OK].
EP10 Hand-Held (Windows Embedded 6.5) User Manual
Chapter 5: Settings

Scancode Remapping

103