Required Applets; Presets; D.1 Required Applets - Psion 7515 User Manual

T I
EKLOGIX
The Teklogix Imagers applet is used to create, modify, delete and activate imager
settings. The principle uses of the applet are to decode bar codes and to capture
images. A Demonstration Application is provided to demonstrates how the imager
works. Refer to "PTSI Imager Demo" on page 69 for details.
D.1

Required Applets

In order to configure imaging, the Manage Triggers and Teklogix Scanners applets
must be present in the Settings>System tab along with the Teklogix Imagers
applet.
D.2

Presets

There are two methods that can be used to configure an imager using the Teklogix
Imagers applet:
• Use a predefined preset.
• Create a custom preset based on a predefined preset.
Important: It is strongly recommended that a predefined preset is used
A preset is a group of exposure and image correction settings. Each preset config-
ures the imager for a specific purpose such as bar code decoding or image capture.
Presets also allow easier and faster configuration of the imager after power-on or
resume from suspend.
The predefined presets are generic and satisfy most user requirements. A custom
preset can be created for a specific user application, such as: include only speci-
fied bar codes, read only a specified number of bar codes or for reading unusual
media.
Preliminary Draft
A
MAGERS PPLET
whenever possible. Each predefined preset contains a coherent
group of settings that are known to work together in the intended
environment. In almost all situations, at least one of the prede-
fined presets results in a satisfactory outcome.
EP10 Hand-Held (Windows Embedded 6.5) User Manual
A
PPENDIX
D
D-1