Uploading Data In A Docking Station; Bluetooth Radio - Psion 7515 User Manual

Chapter 2: Getting to Know the EP10

Uploading Data in a Docking Station

• A 'never used' Lithium-Ion battery that has been stored for 3 years may have limited or
no useful life remaining once put into service. Think of batteries as perishable goods.
2.8

Uploading Data in a Docking Station

Important: Review the documentation provided with the user application installed in
The desktop docking station and quad docking station are typically used to upload transac-
tion data to a server computer when a radio link is not available.
Note: Refer to "Chargers and Docking Stations" on page 223 for more details.
The desktop docking station can complete batch uploads to a Client USB connected PC or
server. An optional 10/100baseT Ethernet module is also available.
Unlike the desktop docking station, the quad docking station supports only TCP/IP connec-
tions to a PC or server through a 10/100baseT Ethernet connection.
When an EP10 is properly inserted in a docking station, a dock icon is displayed in
the navigation bar at the top of the screen. The EP10 also detects the presence of the
Ethernet network.
2.9

Bluetooth Radio

Note: Integrated Bluetooth radios are standard on EP10 units. Keep in mind also that
Bluetooth is available simultaneously with WAN and 802.11g on a single EP10.
The EP10 is equipped with an on-board Bluetooth radio. This type of radio enables short
range data communication between devices. The Bluetooth also provides the capability to
use a Bluetooth-enabled cellular phone as a data modem, exchanging information with other
Bluetooth devices. Refer to "The Bluetooth GPRS Phone" on page 180 for setup details.
24 EP10 Hand-Held (Windows Embedded 6.5) User Manual
Preliminary Draft
your EP10 before performing data uploads.