Screen Orientation; Ep10 Indicators; Leds - Psion 7515 User Manual

Tap on the Align Screen button, and follow the directions on the screen to align (cali-
•
brate) the screen.
Note: This window provides two additional tabs: ClearType and Text Size. Tapping on the
ClearType tab allows you to enable the ClearType option to smooth screen font
appearance. The Text Size tab allows you to increase or decrease the size of the font
displayed on the screen.
2.4.4

Screen Orientation

In addition to screen calibration, the Screen icon allows you to determine how your screen
will be oriented – portrait or landscape (right- or left-handed).
Tap on Start>Settings>System tab.
•
Tap on the Screen icon.
•
• In the General tab, tap on the orientation that best suits the way in which you use
your EP10.
2.5

EP10 Indicators

The EP10 uses LEDs (Light Emitting Diodes), onscreen messages and audio tones to
indicate the various conditions of the EP10, the batteries, the scans and so on.
2.5.1

LEDs

Three LEDs are located on the upper-right side of the EP10, just above the display. When
you press the Power button, the LED flashes yellow to indicate that the EP10 has been
powered up. The LED table following outlines the behaviour of the LED while the EP10 is
docked in a charger.
Keep in mind that the application running on the EP10 can dictate how the application LED
operates. Review the documentation provided with your application to determine
LED behaviour.
Table 2.1 Function of EP10 LEDs
Green Charge LED
(left-most LED)
Preliminary Draft
LED
Charge indicator. See the table below for descriptions of Charge
LED behaviour.
Function
EP10 Hand-Held (Windows Embedded 6.5) User Manual
Chapter 2: Getting to Know the EP10

Screen Orientation

21