Decoded (Internal) Scanner; Options - Decoded (Internal) Scanner - Psion 7515 User Manual

Appendix C: Bar Codes Settings

Decoded (Internal) Scanner

C.2 Decoded (Internal) Scanner
C.2.1 Options – Decoded (Internal) Scanner
Dot Time (msec)
The value selected for "Dot Time (msec)" determines (in milliseconds) how long the target-
ing dot remains on before the scanner switches to a normal scan sweep. When you double-
tap on this parameter, a dialog box is displayed in which you can enter a value of 0 msec,
200 msec or 400 msec. A value of 0 (zero) disables the target dot.
Aim Duration
This parameter determines the total time the aiming pattern appears before the scanner laser
begins sweeping. When you double-tap on this parameter, a dialog box is displayed in which
you can enter a value from 0 to 30 (0 to 3 sec.). A value of 0 (zero) disables the aiming dot.
Laser On Time
The value assigned to this parameter determines how long the laser will remain on when the
scan button or trigger is pressed.
Double-tapping on this parameter displays a dialog box in which you can enter a value
between 5 and 99, each number representing 0.1.
C-2 EP10 Hand-Held (Windows Embedded 6.5) User Manual
Preliminary Draft