Important Instructions; Vehicle Cradle Operation; Operator Controls; Indicators - Psion 7515 User Manual

Figure 6.10 RV1000 Vehicle Cradle

6.11.1 Important Instructions

The RV1000 storage temperature is -40°C to +70°C (-40°F to 158°F). Operating humidity
and temperature is 5 - 95% non-condensing and -30°C to 60°C (-22°F to 140°F).

6.11.2 Vehicle Cradle Operation

6.11.2.1 Operator Controls

The vehicle cradle has no operator controls or power switch.

6.11.2.2 Indicators

The RV1000 has no front indicators. The EP10 LED serves as the power indicator.

6.11.2.3 Placing the EP10 in the Vehicle Cradle

Connect the vehicle power to the EP10 prior to inserting it in the vehicle cradle.
The vehicle cradle is designed with a front opening through which you can pass the con-
nected cable while inserting the EP10 (see Figure 6.10 on page 239).
When placing the EP10 into the vehicle cradle, press firmly on the top of the hand-held and
the EP10 will bottom out on the cradle base. This action will make the final fit to the cradle
base to allow the rear restraining mechanism to resist vibration.
Preliminary Draft
Restraining Mechanisms
Cable Tidy
EP10 Hand-Held (Windows Embedded 6.5) User Manual
Chapter 6: Peripheral Devices & Accessories
PLACE HOLDER
Cable Pass-thru

Important Instructions

Stylus Well
239