Psion 7515 User Manual page 257

for the effects of the design, then we highly recommend using Psion Teklogix designed and
supported accessories.
If you elect to use a third party company produced cradle, Psion Teklogix cannot take re-
sponsibility for the effects of that third party product if it causes failure of our device.
Important: Before using a vehicle cradle, read all instructions and markings on
the housing.
Do not operate a vehicle cradle if damaged by a sharp blow, dropped, or
otherwise damaged in any way; qualified service personnel should inspect
for internal damage.
Shock and vibration specifications for the EP10 are verified using Psion
Teklogix-approved RAM
certified Psion Teklogix mounting hardware is not recommended, and may
void warranty coverage.
Do not expose to rain or snow! However, the Powered Vehicle Cradle is
designed to accept a wet EP10 handheld without harmful effect.
This Powered Vehicle Cradle cannot be used with non- EP10
cradle accessories.
Figure 6.12 RV1005A Front View
Docking
Connector
Speaker
Preliminary Draft
®
mounts and mounting hardware. Use of non-
Latches
PLACE HOLDER
EP10 Hand-Held (Windows Embedded 6.5) User Manual
Chapter 6: Peripheral Devices & Accessories
The Powered Vehicle Cradle – Model No. RV1005
Stylus Well
DC Power LED
243