C.3.13 Code 11 - Psion 7515 User Manual

Appendix C: Bar Codes Settings
Code 11
C.3.13 Code 11
Enabled
Set this parameter to on to enable "Code 11".
Check Digit Verification
The available options for this parameter are MOD 10 Check and Double MOD 10
Check.This parameter uses the specified algorithm of the option you've chosen to ensure the
integrity of the symbol data before transmitting. If the data does not contain that algorithm,
the data is not transmitted.
Transmit Check Digit
If the check digit is to be transmitted with the data, this parameter must be enabled.
Minimum Length
Minimum lengths for the bar code can be set from 0 to 255. The length of a code refers to
the number of characters (i.e., human readable characters), including check digit(s).
Length Restriction
Refer to "Length Restriction" on page C-8 for details.
Add/Remove Data
Refer to "Add/Remove Data" on page C-9 for details.
C.3.14 Interleaved 2 of 5
Enabled
Set this parameter to on to enable "Interleaved 2 of 5".
Reading Range
This parameter determines the reading distance from which a bar code can be successfully
scanned. The default setting, Extended, allows for increased reading distance.
Check Digit Verification
The available options for this parameter are Disabled, MOD 10 Check and French CIP.
"Check Digit Verification" uses the specified algorithm of the option you've chosen to
ensure the integrity of the symbol data before transmitting. If the data does not contain that
algorithm, the data is not transmitted.
C-30 EP10 Hand-Held (Windows Embedded 6.5) User Manual
Preliminary Draft