Figure A.1 Establishing a Connection
Note: If you are prompted to enter a PIN, refer to"Entering a PIN Number" on page A-4
for details.
When "Ready to connect" is displayed in the Status field, the Connect Data button
is enabled.
Tap on the Connect Data button.
•
The progress of the connection is tracked in the Status field.
•
PPP link to modem active.
•
Authenticating user.
•
User authenticated.
•
Connected.
Note: Keep in mind that these states may be displayed fairly quickly if the progress of the
connection is rapid.
When the connection state reaches PPP link to modem active, the taskbar icon changes to in-
dicate an active connection. The Connect Data button changes to Disconnect.
A.1.2.1 Disconnecting From a Network
To disconnect from the network:
•
Tap the stylus on the Disconnect button, and then on OK.
Preliminary Draft
EP10 Hand-Held (Windows Embedded 6.5) User Manual
Appendix A: Wireless Wide Area Network (WWAN)
Establishing a Connection
A-3