Code 39 Settings; Code 128 Settings; C.4.2 Code 39 Settings - Psion 7515 User Manual

Appendix C: Bar Codes Settings

Code 39 Settings

C.4.2 Code 39 Settings
Enabled
Set this parameter to on to enable "Code 39".
Full ASCII
If this parameter is enabled, the characters +, %, and / are used as escape characters. The
combination of an escape character and the next character is converted to an equivalent
ASCII character.
Check Digit Verification
When this parameter is enabled (set to on), the integrity of a "Code 39" symbol is checked to
ensure that it complies with specified algorithms.
Length Restriction
Refer to "Length Restriction" on page C-8 for details.
Add/Remove Data
Refer to "Add/Remove Data" on page C-9 for details.
C.4.3

Code 128 Settings

Enabled
Set this parameter to on to enable "Code 128".
Length Restriction
Refer to "Length Restriction" on page C-8 for details.
Add/Remove Data
Refer to "Add/Remove Data" on page C-9 for details.
C.4.4 EAN 13
Enabled
Set this parameter to on to enable "EAN 13".
C-38 EP10 Hand-Held (Windows Embedded 6.5) User Manual
Preliminary Draft