Acquire Subsystem; Introduction - HP 1652B Programming Reference Manual

ACQuire Subsystem

Introduction

= (2 14 18 I16 I32 ) 64 I128 1256) An integer that specifies the number of averages to be taken of
each time point.
HP 16528/16538
Programming Reference
The ACQuire subsystem commands are used to select the type of
acquisition and the number of averages to be taken if the average type is
chosen. The commands are:
TYPE
l
Figure 24-l. ACQuire Subsystem Syntax Diagram
ACQuire Subsystem
24-1