Table of Contents
Advertisement
HAXis
Note " 3
Command Syntax:
where:
<label-high-value
Examples:
HP 15528/16538
The HAXis command allows you to select whether states or a label's
values will be plotted on the horizontal axis of the chart. The axis is scaled
by specifying the high and low values.
The shortform for STATES is STA. This is an intentional deviation from
the normal trunctation rules.
The HAXis query returns the current horizontal axis label assignment and
scaling.
<label-name > , < label-low-value >, <label-high-value > )
:: = integer from -1023 to 1024
:: = Integer from <state-low-value > to + 1024
:: = a string of up to 6 alphanumeric characters
:: = string from 0 to p-1 (#HFFFFFFFF)
:: = string from c label-low-value Z= to p-1 (#HFFFFFFFF)
OUTPUT XXX;":MACHINEl:SCHART:HAXIS
OUTPUT XXX;":MACHINEl:SCHART:HAXIS
command/query
{STATES, <state-low-value
S T A T E S , - 1 0 0 , 1 0 0 "
'DATA', ' - 5 1 1 ' . ' 5 1 1 " '
HAXis
Subsystem
155
Advertisement
Table of Contents
