Table of Contents
Advertisement
command/query
The XPATtem command allows you to construct a pattern recognizer
term for the X marker which is then used with the XSEarch criteria and
deals with only one label at a time, a complete specification could require
several invocations.
When the value of a pattern is expressed in binary, it represents the bit
values for the label inside the pattern reco @zer term. In whatever base
is used, the value must be between 0 and 2
more than 32 bits. Because the < labelqattem > parameter may contain
don't cares, it is handled as a string of characters rather than a number.
The XPATtem query, in pattern marker mode, returns the pattern
specification for a given label name. In the time marker mode, the query
returns the pattern under the X marker for a given label. If the X marker
is not placed on valid data, don't cares (XX...X) are returned.
Command Syntax:
where:
:: = string of up to 6 alphanumeric characters
:: = "(#B(O)1 IX} . (
. )
OUTPUT XXX; ":MACHINEl:TWAVEFORM:XPATTERN
Example:
HP 1652Wl653B
Advertisement
Table of Contents
