LEVEL
LEVEL
Command Syntax:
where:
Example:
Query Syntax:
Returned Format:
Example:
23-4
The LEVEL command sets the trigger level voltage for the selected
source or path. This command cannot be used in the IMMEDIATE
trigger mode.
The query returns the trigger level for the current path or source.
There is no shortform for LEVEL. This is an intentional deviation from
the normal truncation rule.
: : = T r i g g e r l e v e l i n v o l t s
OUTPUT
XXX;":SCOPE:TRIG:LEVEL
10 DIM El$[lOO]
20 OUTPUT XXX;" :SCOPE:TRIGGER:SOURCE
30 ENTER XXX;El$
40 PRINT El$
50 END
command/query
1.0"
HP 16526/1663B