RMODe
Note d
Command Syntax:
Example:
Query Syntax: :RMoDe?
Returned Format:
Example:
HP 16526/1653B
Programming Reference
The RMODe command is a run control command that specifies the run
mode for logic analyzer and oscilloscope. It is at the same level in the
command tree as SYSTem; therefore, it is not preceded by :SYSTem.
The query returns the current setting.
After specifying the run mode, use the STARt command to start the
acquisition.
OUTPUT XXX;":RMOOE SINGLE"
10 DIM Mode$[lOO]
20 OUTPUT XXX;":RMODE?"
30 ENTER XXX;Mode$
4 0 P R I N T Hode$
RMODe
command/query
System Commands