Table of Contents
Advertisement
OSEarch
Command Syntax:
where:
<occurrence z-
<origin >
Example:
Format:
Example:
HP 16528/1653B
Programming Reference
The OSEarch command defines the search criteria for the 0 marker,
which is then used with associated OPATtem recognizcr
specification when moving the markers on patterns. The origin parameter
tells the marker to
begin
a search with the trigger, the start of data, or with
the X marker. The actual occurrence the marker searches for is
determined
by
the occurrence parameter of the OPATtem
the marker on the selected origin. With a negative occurrence, the marker
searches before the origin. With a positive occurrence, the marker
searches after the origin.
The OSEarch query returns the search criteria for the 0 marker.
:: = integer from -1023 to + 1023
:: = {TRIGger 1 STARt IXMARker}
OUTPUT XXX;":MACHINEl:SLIST:OSEARCH
10 OIM 0s$[100]
20 OUTPUT XXX;": MACHINEl:SLIST:OSEARCH?"
30 ENTER XXX:Os$
40 PRINT Os$
5 0 END
command/query
<occurrence >, < origin >
, <origin > -z NL>
OSEarch
13-13
Advertisement
Table of Contents
