Command Syntax:
where:
Examples:
14-6
The INSert command allows you to add waveforms to the state waveform
display. Waveforms are added from top to bottom on the screen. When
24 waveforms are present, inserting additional waveforms replaces the last
waveform. Bit numbers are zero based, so a label with 8 bits is referenced
as bits O-7. Specifying OVERlay causes a composite waveform display of
all bits or channels for the specified label.
:: = string of up to 6 alphanumeric characters
:: = {OVERlay 1 < bit-num > }
:: = integer representing a label bit from 0 to 31
OUTPUT XXX;":MACHINEl:SWAVEFORM:INSERT
OUTPUT XXX;":MACHINEl:SWAVEFORM:INSERT
O U T P U T XXX;":MACHl:SWAV:INSERT
<label-name >, < bit-id z=
' W A V E ' , 1 9 "
'ABC', OVERLAY"
HP 1652B/l663B
Programming Reference
command