Slave - HP 1652B Programming Reference Manual

SLAVe

SLAVe
Note
3
Command Syntax:
where:
Example:
Query Syntax:
Returned Format:
Example:
11-10
The SI.AVe clock command allows you to specify a slave clock for a given
machine. The slave clock is only used in the Mixed and Demultiplexed
clocking modes. Each command deals with only one clock (J,K,L,M,N);
therefore, a complete clock specification requires five commands, one for
each clock. Edge specifications (RISing, FALLing, or BOTH) are ORed.
Level specifications (LOW or HIGH) are ANDed.
The slave clock must have at least one edge specified.
The SLAVe query returns the clock specification for the specified clock.
: : = {JJKILJM(N}
:: = (OFF1 RlSing 1 FALLlng ) BOTH I LOW I HIGH)
OUTPUT XXX;":MACHINEZ:SFORMAT:SLAVE
2 0 O U T P U T XXX;":MACHINE2:SFORMAT:SLAVE? <clock-id>"
30 ENTER XXX String$
40 PRINT String$
50 END
command/query
<clock-id z , <clock-spec>
J, RISING"
<clock-id >
<clock-id >, cclock-spec
HP 16528/1653B
Programming Reference