Table of Contents
Advertisement
OPATtern
Command Syntax:
where:
c label-name >
Examples:
HP 16528/1663B
Programming Reference
The OPATtem command allows you to construct a pattern recognizer
term for the 0 Marker which is then used with the OSEarch criteria when
moving the marker on patterns. Since this command deals with only one
label at a time, a complete specification could require several invocations.
When the value of a pattern is expressed in biiary, it represents the bit
values for the label inside the pattern reco @zer term. In whatever base
is used, the value must be between 0 and 2
more than 32 bits. Because the c labelgattern > parameter may contain
don't cares, it is handled as a string of characters rather than a number.
The OPATtern query returns the pattern specification for a given label
name.
:: = string of up to 6 alphanumeric characters
:: = "{#B{OI 1 IX} . . . 1
O U T P U T XXX;":MACHINEl:SLIST:OPATTERN
OUTPUT XXX;":MACHINEl:SLIST:OPATTERN
<label-name z=, < labelgattern >
. . 1
. . I
. . }"
OPATtern
command/query
13-11
Advertisement
Table of Contents
