Sre - HP 1652B Programming Reference Manual

*SRE

N o t e d status.
Command Syntax:
where:
Example:
HP 16528/l 6538
Programming Reference
(Service Request Enable)
The *SRE command sets the Service Request Enable Register bits. The
Service Request Enable Register contains a mask value for the bits to be
enabled in the Status Byte Register. A one in the Service Request Enable
Register will enable the corresponding bit in the Status Byte Register. A
zero will disable the bit. Refer to table 5-3 for the bits in the Service
Request Enable Register and what they mask.
The *SRE query returns the current value.
Refer to appendix B, "Status Reporting," for a complete discussion of
:: = integer from 0 to 255
OUTPUT XXX; "*SRE 16"
This example forces the h4AV bit high (see table 5-3).
*SRE
command/query
Common Commands
511