COUPling
Command Syntax:
Example:
Query Syntax:
Example:
The COUPling command sets the input impedance for the selected
channel. The choices are either 1M Ohm (DC) or 50 Ohms (DCFifIy).
The query returns the current input impedance for the specified channel.
1 I2):COUPling { D C ) DCFifty}
OUTPUT XXX ; " :SCOPE:CHANNELl:COUPLING D C "
1 0 DIM cct[lool
20 OUTPUT XXX;":SCOPE:CHANNELl:COUPLING?"
30 ENTER XXX;Cc$
4 0 P R I N T Cc$
END
50
command/query
HP 16528/1653B