Table of Contents
Advertisement
CLOCk
CLOCk
Command Syntax:
where:
Example:
Query Syntax:
Returned Format:
Example:
The CLOCk command selects the clocking mode for a given pod when the
pod is assigned to the state analyzer. When the NORMal option is
specified, the pod will sample all 16 channels on the master clock. When
the MIXed option is specified, the upper 8 bits will be sampled by the
master clock and the lower 8 bits will be sampled by the slave clock.
When the DEMultiplex option is specified, the lower 8 bits will be
sampled on the slave clock and then sampled again on the master clock.
The master clock always follows the slave clock when both are used.
The CLOCk query returns the current clocking mode for a given pod.
::= Pod {I 1213(415}
: : = {NORMal 1 MIXed I DEMultiplex}
OUTPUT XXX;":MACHINEl:SFORMAT:CLOCKL
[ : M A C H i n e { l I2}:SFORmat:CLOCK<Nz]
10 DIM String$ [loo]
20 OUTPUT XXX; ":MACHINEl:SFDRMAT:CLDCK2?"
30 ENTER XXX; String$
4 0 P R I N T String$
50 END
command/query
< c l o c k - m o d e >
NORMAL"
< c l o c k - m o d e > <NL>
HP 16628/1663B
Programming Reference
Advertisement
Table of Contents
