Otag - HP 1652B Programming Reference Manual

OTAG

Command Syntax:
Example:
Query Syntax:
Returned Format:
Example:
HP 1652B/l653B
Progmmming Reference
The OTAG command specifies the tag value on which the 0 Marker
should be placed. The tag value is time when time tagging is on or states
when state tagging is on. If the data is not valid tagged data, no action is
performed.
The OTAG query returns the 0 Marker position in time when time
the marker was positioned in time or through a pattern search. If data is
not query returns 9.9E37 for
valid, the
tagging.
:: = real number
:: = integer
10 DIM OtS[loo]
20 OUTPUT XXX:":MACHINEl:SLIST:OTAG?"
30 ENTER XXX;Ot$
40 PRINT Ot$
50 END
command/query
for
time tagging, 32767 state
OTAG