Table of Contents
Advertisement
Note 6
Query Syntax:
Returned Format:
where:
Example:
Subsystem
27-6
The FALLTime query makes a falI time measurement on the selected
channel. The measurement is made between the 90% to the 10% voltage
point of the first falling edge displayed on screen.
The short form of FALLTIME is FALLTime. This is an intentional
deviation of the normal truncation rule.
:: = time in seconds between 10% and
20 OUTPUT XXX;":SCOPE:MEASURE:SOURCE
30 ENTER XXX;Ft$
40 PRINT Ft$
50 END
HP 16528/1653B
Advertisement
Table of Contents
