Table of Contents
Advertisement
Command Syntax:
where:
Example:
Query Syntax:
Format:
Example:
HP 16528/1663B
Programming Reference
The OFFSet command sets the voltage that is represented at center
screen for the selected channel. The allowable offsets for 1:l probes are:
The allowable offset is -t5 V for any vertical range when the input
impedance is set to 50 R.
The offset value is recompensated whenever the probe attenuation factor
is changed.
The query returns the current value for the selected channel.
1 IP}:OFFSet
::= {-2~Vto+~Vmax.atlMR
OUTPUT XXX;":SCOP:CHANl:OFFS
1 I2):OFFSeq <value > c NL>
10 DIM Co$[lOO]
20 OUTPUT XXX;":SCOPE:CHANNELl:OFFSET?"
30 ENTER XXX;Co$
40 PRINT Co$
50 END
command/query
1.5"
Subsystem
Advertisement
Table of Contents
