Table of Contents
Advertisement
Command Syntax:
Example:
System Commands
6 - 3 4
The PRINt command initiates a print of the screen or print all over the
RS-232C bus. The PRINt parameters SCReen or ALL specify how the
screen data is sent to the controller. PRINt SCReen transfers the data to
the controller in a printer specific graphics format. PRINt ALL transfers
the data in a raster format for the following menus:
State and Timing Format menus
l
Disk menu
l
State and Timing Symbol menus
l
State Listing menu
State Trace
l
{ S C R e e n 1 ALL}
OUTPUT XXX;":SYSTEM:PRINT
SCREEN"
Programming Reference
command
HP 16528/16538
Advertisement
Table of Contents
