Table of Contents
Advertisement
XTIMe
XTIMe
Command Syntax:
where:
Example:
Query Syntax:
Returned Format:
Example:
The XTIMe command positions the X Marker on the timing waveforms in
the mixed mode display. If
no action.
The XTIMe query returns the X Marker position in time. If data is not
valid, the query returns 9.9E37.
<time-value >
:: = real number
OUTPUT XXX.":WLIST:XTIME
10 DIM Tx$[lOO]
20 OUTPUT XXX;":WLIST:XTIME?"
30 ENTER XXX;TxS
40 PRINT Tx$
50 END
command/query
the data
is not valid, the command performs
HP 16528/1653B
Advertisement
Table of Contents
