HP 1652B Programming Reference Manual page 134

OTIMe
Command Syntax:
where:
<time value >
Example:
Query Syntax:
Format:
Example:
HP 1652B/l653B
Programming Reference
The OTIMe command positions the 0 Marker on the timing waveforms in
the mixed mode display. If the data is not valid, the command performs
no action.
The OTIMe query returns the 0 Marker position in time. If data is not
valid, the query returns 9.9E37.
<time-value z-
: : = r e a l n u m b e r
OUTPUT XXX,":WLIST:OTIME
<time-value> c NL>
10 DIM To$[lOO]
20 OUTPUT XXX;":WLIST:OTIME?"
30 ENTER XXX;To$
40 PRINT To$
50 END
OTIMe
command/query