M O D E
Command Syntax:
Example:
Query Syntax:
Returned Format:
Example:
HP 16528/16538
Programming Reference
The MODE command allows you to select the trigger mode for the
oscilloscope. The EDGE mode will trigger the oscilloscope on an edge
whose slope is determined by the SLOPe command at a voltage set by the
LEVEL command. In the IMMediate trigger mode, the oscilloscope goes
to a freerun mode and does not wait for a trigger. The IMMediate mode is
used in armed-by other machine applications.
The query returns the current mode.
{EDGE 1 IMMediate}
OUTPUT
XXX;":SCOPE:TRIGGER:MOOE
10 DIM Md$[lOO]
20 OUTPUT XXX;":SCOPE:TRIGGER:MOOE?"
30 ENTER XXX;Md$
40 PRINT Md$
50 END
command/query
EDGE"
MODE
23-5