MESE
Command Syntax:
where:
Example:
HP 16528/1653B
Programming Reference
The MESE command sets the Module Event Status Enable Register bits.
The MESE register contains a mask value for the bits enabled in the
MESR register. A one in the MESE will enable the corresponding
the MESR, a zero will disable the bit.
The MESE query returns the current setting.
Refer to table 6-2 for information about the Module Event Status Enable
register bits, bit weights, and what each bit masks for the logic analyzer.
: S Y S T e m : M E S E
< e n a b l e - m a s k >
:: = integer from 0 to 255
OUTPUT
XXX;" :SYSTEM:MESE
1"
MESE
command/query
bit in
System Commands
6 2 9