Change The Jumper To Acquire A Different State Listing - HP 1660 Series Training Manual

Comparing State Traces

Change the Jumper to Acquire a Different State Listing

Change the Jumper to Acquire a Different State Listing
Changing the glitch jumper changes channel 7 of the counter so that some of
the acquired states will not match the original listing. After you change the
jumper, you will acquire the data again in the next exercise, then compare it
to the data you copied to the Reference Listing.
Pull the glitch jumper from the pins labeled GLITCH OFF.
1
Push the jumper onto the pins labeled GLITCH ON.
2
CLK2
CLK1
GLITCH
Result
The glitch jumper is changed to GLITCH ON. The next listing you acquire
will be different from the one you copied to the Compare Reference listing.
4-8
P. G.
OSC
P. G.
CLK2
OFF
ON
Get other manuals https://www.bkmanuals.com