Threshold - HP 1652B Programming Reference Manual

Note " 4
Command Syntax:
where:
ECL
Example:
Syntax:
Query
Returned Format:
Example:
17-6
The THReshold command allows you to set the voltage threshold for a
given pod to ECL, 'ITL or a specific voltage from -9.9V to + 9.9V in 0.1
volt increments.
On the HP 1652B, the pod thresholds of pods 1,2, and 3 can be set
independently. The pod thresholds of pods 4 and 5 are slaved together;
therefore, when you set the threshold on pod 4 or 5, both thresholds will
be changed to the specified value. On the HP 1653B, both pods 1 and 2
can be set independently.
The THReshold query returns the current threshold for a given pod.
::= podnumber(112131415)
:: = voltage (real number) -9.9 to
:: = default value of + 1.6V
:: = default value of -1.3V
10 DIM Value$ [loo]
20 OUTPUT XXX;":MACHINE1:TFORMAT:THRESHOLO2?"
30 ENTER XXX;Value$
40 PRINT Value$
50 EN0
command/query
(TTL 1 ECL 1 -z value > }