Services; Sip-Based Media Recording Parameters - AudioCodes Mediant 800B User Manual

User's Manual
Parameter
Web: Enable Pattern Detector
[EnablePatternDetector]
[PDPattern]
[PDThreshold]

54.14 Services

54.14.1 SIP-based Media Recording Parameters

The SIP-based media recording parameters are described in the table below.
Parameter
Web: SIP Recording Application
CLI: configure voip/services sip-
recording general-
setting/enable-sip-rec
[EnableSIPRec]
Web: Recording Server (SRS)
Destination Username
CLI: configure voip/services sip-
recording general-
setting/siprec-server-dest-
username
[SIPRecServerDestUsername]
SIP Recording Routing Table
Web: SIP Recording Routing
table
CLI: configure voip/services sip-
recording sip-rec-routing
[SIPRecRouting]
Version 6.8
Enables the Pattern Detector (PD) feature.


Defines the patterns that can be detected by the Pattern
Detector.
The valid range is 0 to 0xFF.
Note: For this parameter to take effect, a device reset is
required.
Defines the number of consecutive patterns to trigger the
pattern detection event.
The valid range is 0 to 31. The default is 5.
Note: For this parameter to take effect, a device reset is
required.
Table 54-74: SIP-based Media Recording Parameters
Enables the SIP-based Media Recording feature:

[0] Disable (default)

[1] Enable
Note: For this parameter to take effect, a device reset is required.
Defines the SIP user part for the recording server. This user part is
added in the SIP To header of the INVITE message that the device
sends to the recording server.
The valid value is a string of up to 50 characters. By default, no
user part is defined.
Defines SIP Recording Routing rules (calls to record).
The format of the ini file table parameter is as follows:
[ SIPRecRouting ]
FORMAT SIPRecRouting_Index =
SIPRecRouting_RecordedIPGroupID,
SIPRecRouting_RecordedSourcePrefix,
SIPRecRouting_RecordedDestinationPrefix,
SIPRecRouting_PeerIPGroupID,
SIPRecRouting_PeerTrunkGroupID, SIPRecRouting_Caller,
SIPRecRouting_SRSIPGroupID;
[ \SIPRecRouting ]
For a detailed description of this table, see ''Configuring SIP
54. Configuration Parameters Reference
Description
[0] Disable (default)
[1] Enable
Description
945 Mediant 800B Gateway and E-SBC