AudioCodes Mediant 800B User Manual page 957

User's Manual
Notes:
•
Profile 1: G.711 at 20ms only, with In-band signaling (in voice channel) and Silence
Suppression (no fax detection or T.38 support).
•
Profile 2: G.711, G.726, G.729, G.723.1, and AMR-NB, T.38 with fax detection, In-
band signaling (in voice channel), and Silence Compression.
•
All hardware assemblies also support the following DSP channel capabilities: echo
cancellation (EC), CID (caller ID), RTCP XR reporting, and SRTP.
•
SBC Enhancements includes the network Acoustic Echo Suppressor.
•
IPM Detectors includes Automatic Gain Control (AGC) and Answer Detector (AD).
•
V.150.1 is supported only for the US Department of Defense (DoD).
•
Transcoding Sessions represents part of the total SBC Sessions.
•
Conference Participants represents the number of participants in one or more
conference (bridge), where each conference may include three or more participants.
Conferences are supported on all above configurations. For figures on the maximum
number of participants per configuration, please contact your AudioCodes sales
representative.
•
For availability of the telephony assemblies listed in the table above, please contact
your AudioCodes sales representative.
Version 6.8
55. SBC and DSP Channel Capacity
957 Mediant 800B Gateway and E-SBC