AudioCodes Mediant 800B User Manual page 923

User's Manual
Parameter
Tel to IP
CLI: configure voip > gw
manipulations redirect-
number-map-tel2ip
[RedirectNumberMapTel2IP]
Phone Context Table
Web: Phone Context Table
EMS: SIP Manipulations >
Phone Context
CLI: configure voip > gw
manipulations phone-context-
table
[PhoneContext]
Web/EMS: Add Phone
Context As Prefix
CLI: add-ph-cntxt-as-pref
[AddPhoneContextAsPrefix]
Version 6.8
FORMAT RedirectNumberMapTel2Ip_Index =
RedirectNumberMapTel2Ip_ManipulationName,
RedirectNumberMapTel2Ip_DestinationPrefix,
RedirectNumberMapTel2Ip_RedirectPrefix,
RedirectNumberMapTel2Ip_RemoveFromLeft,
RedirectNumberMapTel2Ip_RemoveFromRight,
RedirectNumberMapTel2Ip_LeaveFromRight,
RedirectNumberMapTel2Ip_Prefix2Add,
RedirectNumberMapTel2Ip_Suffix2Add,
RedirectNumberMapTel2Ip_IsPresentationRestricted,
RedirectNumberMapTel2Ip_SrcTrunkGroupID,
RedirectNumberMapTel2Ip_SrcIPGroupID;
[\RedirectNumberMapTel2Ip]
For a description of this table, see ''Configuring Redirect Number
Manipulation'' on page 355.
This table parameter configures the Phone Context table. This
parameter maps NPI and TON to the SIP 'phone-context' parameter,
and vice versa.
The format for this parameter is as follows:
[PhoneContext]
FORMAT PhoneContext_Index = PhoneContext_Npi,
PhoneContext_Ton, PhoneContext_Context;
[\PhoneContext]
For example:
PhoneContext 0 = 0,0,unknown.com
PhoneContext 1 = 1,1,host.com
PhoneContext 2 = 9,1,na.e164.host.com
For a detailed description of this table, see ''Configuring NPI/TON-
SIP Phone-Context Mapping Rules'' on page 360.
Determines whether the received Phone-Context parameter is added
as a prefix to the outgoing ISDN Setup message with (for digital
interfaces) Called and Calling numbers.

[0] Disable (default)

[1] Enable
923
54. Configuration Parameters Reference
Description
Mediant 800B Gateway and E-SBC