Saving Configuration - AudioCodes Mediant 800B User Manual


To unlock the device:
1. Open the Maintenance Actions page (see ''Maintenance Actions'' on page 565).
2. Under the 'LOCK / UNLOCK' group, click the UNLOCK button. Unlock starts
immediately and the device accepts new incoming calls.
Note: The Home page's General Information pane displays whether the device is
locked or unlocked (see ''Viewing the Home Page'' on page 51).
35.4

Saving Configuration

The Maintenance Actions page allows you to save (burn) the current parameter
configuration (including loaded auxiliary files) to the device's non-volatile memory (i.e.,
flash). The parameter modifications that you make throughout the Web interface's pages
are temporarily saved (to the volatile memory - RAM) when you click the Submit button on
these pages. Parameter settings that are saved only to the device's RAM revert to their
previous settings after a hardware/software reset (or power failure). Therefore, to ensure
that your configuration changes are retained, you must save them to the device's flash
memory using the burn option described below.

To save the changes to the non-volatile flash memory:
1. Open the Maintenance Actions page (see ''Basic Maintenance'' on page 565).
2. Under the 'Save Configuration' group, click the BURN button; a confirmation message
appears when the configuration successfully saves.
Notes:
•
Saving configuration to the non-volatile memory may disrupt current traffic on the
device. To avoid this, disable all new traffic before saving, by performing a graceful
lock (see ''Locking and Unlocking the Device'' on page 567).
•
Throughout the Web interface, parameters displayed with the lightning
are not applied on-the-fly and require that you reset the device for them to take
effect (see ''Resetting the Device'' on page 565).
•
The Home page's General Information pane displays whether the device is
currently "burning" the configuration (see ''Viewing the Home Page'' on page 51).
User's Manual
Mediant 800B Gateway and E-SBC
568
symbol
Document #: LTRT-10278