AudioCodes Mediant 800B User Manual page 732

Parameter
system/logging/syslog-cpu-
protection
[SyslogCpuProtection]
Web: Syslog Facility Number
EMS: SyslogFacility
[SyslogFacility]
Web: CDR Session ID
CLI: cdr-seq-num
[CDRSyslogSeqNum]
Web: Activity Types to
Report via Activity Log
Messages
CLI: config-system > logging
> activity-log
[ActivityListToLog]
User's Manual
drops to a critical level, the device automatically lowers the debug
level until CPU utilization returns to normal. In other words, if the
debug level is [5] Detailed, it lowers it to [1] Basic (or [0] No Debug, if
necessary); if the debug level is [1] Basic, it lowers it to [0] No Debug
(debug disabled).

[0] Disable

[1] Enable (default)
Defines the Facility level (0 through 7) of the device's Syslog
messages, according to RFC 3164. This allows you to identify Syslog
messages generated by the device. This is useful, for example, if you
collect the device's and other equipments' Syslog messages, at one
single server. The device's Syslog messages can easily be identified
and distinguished from other Syslog messages by its Facility level.
Therefore, in addition to filtering Syslog messages according to IP
address, the messages can be filtered according to Facility level.

[16] = (Default) local use 0 (local0)

[17] = local use 1 (local1)

[18] = local use 2 (local2)

[19] = local use 3 (local3)

[20] = local use 4 (local4)

[21] = local use 5 (local5)

[22] = local use 6 (local6)

[23] = local use 7 (local7)
Enables or disables the inclusion of the sequence number (S=) in
CDR Syslog messages.

[0] Disable

[1] Enable (default)
Defines the operations (activities) in the Web interface that are
reported to a Syslog server.

[pvc] Parameters Value Change = Changes made on-the-fly to
parameters. Note that the ini file parameter,
EnableParametersMonitoring can also be used to set this option,
using values [0] (disable) or [1] (enable).

[afl] Auxiliary Files Loading = Loading of auxiliary files.

[dr] Device Reset = Resetting of device through the Maintenance
Actions page.
Note: For this option to take effect, a device reset is required.

[fb] Flash Memory Burning = Saving configuration with burn to
flash (in Maintenance Actions page).

[swu] Device Software Update = Software updates (i.e., loading of
cmp file) through the Software Upgrade Wizard.

[ard] Access to Restricted Domains = Access to restricted Web
pages:

(1) ini parameters (AdminPage)

(2) General Security Settings

(3) Configuration File

(5) Software Upgrade Key Status

(7) Web & Telnet Access List

(8) WEB User Accounts

[naa] Non-Authorized Access = Attempts to access the Web
interface with a false or empty username or password.

[spc] Sensitive Parameters Value Change = Changes made to
732
Mediant 800B Gateway and E-SBC
Description
Document #: LTRT-10278