AudioCodes Mediant 800B User Manual page 726

Parameter
Web: NTP UTC Offset
EMS: UTC Offset
CLI: utc-offset
[NTPServerUTCOffset]
Web: NTP Update Interval
EMS: Update Interval
CLI: update-interval
[NTPUpdateInterval]
Web: NTP Authentication Key
Identifier
CLI: configure system > ntp >
auth-key-id
[NtpAuthKeyId]
Web: NTP Authentication
Secret Key
CLI: configure system > ntp >
auth-key-md5
[ntpAuthMd5Key]
Daylight Saving Time Parameters
Web: Day Light Saving Time
EMS: Mode
CLI: summer-time
[DayLightSavingTimeEnable]
Web: Start Time / Day of
Month Start
EMS: Start
CLI: start
[DayLightSavingTimeStart]
Web: End Time / Day of Month
End
EMS: End
CLI: end
[DayLightSavingTimeEnd]
User's Manual
Defines the Universal Time Coordinate (UTC) offset (in seconds)
from the NTP server.
The default offset is 0. The offset range is -43200 to 43200.
Defines the time interval (in seconds) that the NTP client requests
for a time update.
The default interval is 86400 (i.e., 24 hours). The range is 0 to
214783647.
Note: It is not recommend to set this parameter to beyond one
month (i.e., 2592000 seconds).
Defines the NTP authentication key identifier for authenticating NTP
messages. The identifier must match the value configured on the
NTP server. The NTP server may have several keys configured for
different clients; this number identifies which key is used.
The valid value is 1 to 65535. The default is 0 (i.e., no authentication
is done).
Defines the secret authentication key shared between the device
(client) and the NTP server, for authenticating NTP messages.
The valid value is a string of up to 32 characters. By default, no key
is defined.
Enables daylight saving time.

[0] Disable (default)

[1] Enable
Defines the date and time when daylight saving begins. This value
can be configured using any of the following formats:

Day of year - mm:dd:hh:mm, where:

mm denotes month

dd denotes date of the month

hh denotes hour

mm denotes minutes
For example, "05:01:08:00" denotes daylight saving starting from
May 1 at 8 A.M.

Day of month - mm:day/wk:hh:mm, where:

mm denotes month (e.g., 04)

day denotes day of week (e.g., FRI)

wk denotes week of the month (e.g., 03)

hh denotes hour (e.g., 23)

mm denotes minutes (e.g., 10)
For example, "04:FRI/03:23:00" denotes Friday, the third week of
April, at 11 P.M. The week field can be 1-5, where 5 denotes the
last occurrence of the specified day in the specified month. For
example, "04:FRI/05:23:00" denotes the last Friday of April, at 11
P.M.
Defines the date and time when daylight saving ends. For a
description of the format of this value, see the
DayLightSavingTimeStart parameter.
726
Mediant 800B Gateway and E-SBC
Description
Document #: LTRT-10278